Skip to main content

Drill

Fakes, passes and drives

Juan Knario Deve 2089 views 4 steps
In this drill, we will divide the players into 2 groups and split the court into right and left sides. Each group will start on one side, and when the coach says so or the set time passes, they will switch sides. Players with the ball are placed in the corners and another without the ball at 45º on the perimeter. A cone on each side at 45º and slightly inside the perimeter.

Tactical viewer

Use the existing playback controls to study the movement, then review each step below.

Comments

Comments

Sign in or register to continue. Your draft will remain in this browser and will not be published automatically.

Step by step

Step descriptions

Review the court position and available coaching instructions for each step.

Drill Fakes, passes and drives, STEP 1: Start of the drill: Initial setup of players, cones and balls

STEP 1

Start of the drill:
  1. Initial setup of players, cones and balls.
Drill Fakes, passes and drives, STEP 2: Start of the drill: Player 3 moves out to the 45° position to receive the pass from player 1

STEP 2

Start of the drill:
  1. Player 3 moves out to the 45° position to receive the pass from player 1. Once he receives the ball, he starts a drive towards the basket, stopping with a fake before stepping back and going around the cone to attack the basket. Once player 1 makes the pass, he immediately runs to join the top-of-the-key line on the same side.
  2. At the same time, the same movement begins on the opposite side.
Drill Fakes, passes and drives, STEP 3: Players who drive towards the basket pass the ball out to the corners and then move to the position behind the player who receives their pass

STEP 3

  1. Players who drive towards the basket pass the ball out to the corners and then move to the position behind the player who receives their pass.
  2. From here, the drill is continuous, repeating the same sequence.

Drill Fakes, passes and drives, STEP 4: Reset

STEP 4

Reset